AC Installation Dallas TX
- New AC systems sized with a real load calculation, not a phone guess
- Most installations finish in one day, with the warranty registered for you
- Free written estimate and honest repair-versus-replace math first
Send Us A Message
Buying a new air conditioner is one of the biggest checks a Dallas homeowner writes, and most people only do it two or three times in their life. That makes it easy to overpay or end up with the wrong size system. Bloom Air Duct Cleaning provides AC installation in Dallas TX with honest sizing, written quotes, and clean workmanship. Call (469) 517-1229 for a free installation estimate.
Here is a number worth knowing: in a Dallas summer, your AC can run 12 hours or more a day for weeks straight. A system that is sized right and installed right will do that for 15 years. A rushed install can cut that life almost in half. The install matters as much as the equipment.
Install AC the Right Way, Not the Fast Way
When we install AC systems, the job starts before any equipment shows up. We measure your home, count windows, check insulation, and look at the ductwork. That is called a load calculation, and it tells us the exact cooling capacity your house needs. Skipping it is how houses end up with systems that are too big or too small.
Plenty of companies quote a new system over the phone in five minutes. That quote is a guess. Ours is not, and it is written, itemized, and good for the price we said.
Choosing the Right Size AC for a Texas Home
Bigger is not better with air conditioning. An oversized unit cools the air fast but shuts off before it pulls the humidity out. In a humid Dallas August, that leaves the house cold and clammy at the same time — and the constant starting and stopping wears out parts years early.
An undersized unit has the opposite problem. It runs nonstop, never quite catches up on triple-digit days, and shows up as a painful electric bill. The right size runs in long, steady cycles, keeps humidity down, and lasts. That is what the load calculation buys you.
What a Full AC Installation Includes
A complete installation covers removal and haul-away of the old unit, a level pad for the new condenser, new refrigerant lines or a pressure-tested flush of the old ones, a matched indoor coil, proper refrigerant charge by weight, a condensate drain with a safety switch, and thermostat hookup. We finish by testing temperatures at the vents so you see the numbers, not just feel a guess.
Every step goes on your quote in plain language. If a line item is not needed for your home, it is not on your bill.
SEER Ratings and Your Electric Bill
SEER is the miles-per-gallon of air conditioners. Moving from an old 10 SEER unit to a modern 15 or 16 SEER system typically trims cooling costs by a third or more — and in Dallas, cooling is most of your summer bill. Over a 15-year life, that difference often pays for a chunk of the system itself.
We will show you the realistic payback for two or three efficiency levels, using your actual usage, so you can pick with real numbers instead of a brochure. You can also compare certified models in the ENERGY STAR product finder before we talk numbers.
Ductwork: The Half of the Install Everyone Skips
A brand-new air conditioner pushing air through leaky, dirty ducts is like new tires on bent rims. Dallas attics are brutal on ductwork — joints loosen, insulation flattens, and dust builds up for years. If your ducts leak 25 percent of their air, your new system is 25 percent smaller than the sticker says.
Before the install, we check the ducts. If they need help, a thorough Dallas air duct cleaning and duct sealing service protects the investment you just made. It is the cheapest performance upgrade in the whole project.
Ductless Options for Additions and Garages
Not every space needs a full central system. Garage apartments, sunrooms, home offices, and additions are often better served by a ductless mini split — no ductwork, room-by-room control, and very low operating cost.
If part of your house never cools right, ask us about it during your estimate. Our ductless heating and A/C services in Dallas cover sizing, installation, and service for these systems.
Installation Day: What to Expect
Most residential installations finish in one day. The crew arrives in the morning, protects the floors, pulls the old equipment, sets the new system, and walks you through the thermostat before leaving. You get the registration papers for the manufacturer warranty, and we register the equipment for you so the full term actually applies.
You also get our workmanship guarantee in writing. If something we installed is not right, we come back and make it right. That is the whole policy.
Get an AC Installation Quote in Dallas TX
Call (469) 517-1229 or send us a message for a free, no-pressure estimate anywhere in the Dallas area. Not sure the old unit is done? Start with our AC repair service — if a fix makes more sense, that is what we will tell you. And if you want smarter control of the new system, ask about smart thermostat installation while the crew is already there.
Frequently Asked Questions
Do you offer same-day AC repair in Dallas?
Yes. We answer seven days a week, 7 AM to 8 PM, with same-day priority for no-cooling calls.
How much does AC repair cost?
Every job starts with a free estimate and a written flat price before any work. If the fix is a small part, that is what we quote.
Why is my AC not blowing cold air?
The most common Dallas causes are a dirty filter, a failed capacitor, low refrigerant from a leak, or a frozen evaporator coil.
Should I repair or replace my AC?
Multiply the repair cost by the age of the unit in years. If the answer passes 5,000, replacement deserves a serious look.
What brands do you service?
All major brands, including Carrier, Trane, Lennox, Goodman, and Rheem.
Do you clean AC coils and drain lines?
Yes. AC cleaning covers the evaporator coil, condenser, blower, and condensate drain.
Do you work on ductless mini splits?
Yes. We install, clean, and repair ductless systems for rooms, garages, and additions.
How often should an AC be serviced?
Once a year, in spring, before the Texas cooling season. Yearly-serviced systems rarely fail in July.
Can dirty ductwork affect my AC?
Yes. Leaky or clogged ducts can waste up to a third of your cooling and make a healthy AC look broken.
What areas do you serve for AC work?
Dallas, Fort Worth, Colleyville, and North Richland Hills, plus surrounding DFW communities.